Our deadlock barrel blanking repair shield has been designed to cover the standard L4V high position deadlock fitting position for customers that wish to blank the deadlock off rather than repair the deadlock.
Product - VW T7 (2025 Onwards) Side Load Door External DEADLOCK BARREL BLANK Repair Shield
Specification - Stainless Steel
Finish - Brushed Stainless
Barrel blank shield for the LEFT-N/S load door of the VW T7. This product is to repair damage around a deadlock on the side load door break in and completely patch up the area around where a deadlock once was.
This Shield is a development by Sussex Installations to give you a good cost effective repair solution if you have a hole in the side load door from a deadlock on your VW T7 van. Made from high corrosion resistant grade stainless steel and designed by us at Sussex Installations match the body styling of your VW T7 van, our shield comes complete with gasket, stainless steel nuts, stainless steel washers and full fitting instructions.
This is our Sussex Installations designed and trademarked part and is not available any where else in the world! In addition to having our shields fitted, we would also like to take this chance to remind you to always double lock your van from the remote control so that the internal release cables will not open the door up (don't double lock your van if you have left someone inside of it, as that will not be safe for them!).
This shield set has been designed by us; to be an effective security product that can be fitted either professionally or by a competent DIY van owner.
Want colour coding? What can I expect?
We are happy to now offer our new colour coding service. But be aware that although we will be painting the shield to the colour code of your van, we will not be matching the variant shade of that colour to your van in the way that a body shop would (if they were repairing your van). With the metallic colours the metallic flake distribution some time shines in different ways so can cause a blotchy look from certain angles.
Van colours can change over time and also have very slight variants depending on how the paint was mixed at the factory. We will take great care and consideration when painting your shield at our in house paint facility and give you real value for your money, but it is important that you realise that the colour may not be a perfect match to your van. It will however make the shield much more in keeping with your van than a brushed stainless steel or Matte black powder coated shield would.
