Jul 3, 2026 · 1,115 recorded views
What's the best lock for my van?
It's a question I've been asked for years — but van security isn't about finding one magic lock or one security product.
It's about multiple layers of security.
In this video, I walk around a Ford Transit Custom that's had a complete security package fitted, including visible and hidden protection, additional locks and an upgrade to the factory alarm.
The principle is the same one we were recommending back in 2018:
On this Transit Custom, we've used multiple layers of security, including shielding, internal Stealth protection, additional locks and a factory alarm upgrade.
Attack methods change. Van thieves adapt. That's exactly why we don't believe in putting all your faith in one product.
Layer the security. Make the attack harder. Give the next layer a chance to stop them.
I've been fitting van security for over 23 years, and this is still the approach I believe in today.
Sussex Installations — The OG Van Security Specialist.
Read our original 2018 article explaining our three-strategy approach: Why we recommend multiple layers of van security
Find out more on our website at https://www.sussexinstallations.co.uk
Historical context: This video records the advice, products and attack methods relevant when it was published. Current recommendations may have changed as vehicles, products and criminal methods evolved.
Jeff Scott explains that van security isn't about finding one magic lock or one security product. Attack methods change and thieves adapt, so the approach is multiple layers: protect the vehicle's known weak points, add an additional layer of locking security, and add alarm and load-area protection. The idea is to make the attack harder and give the next layer a chance to stop them.
After thieves cut a hole in the side load door, the van was repaired with an external shield and fitted with a Stealth Trap, an internal shield that is double layer thick in the most vulnerable places, and a Stealth Trap anchor bolted to the internal skin of the door. The barn doors received an external shield and internal Stealth shield, hook deadlocks were fitted to the side load and barn doors, and the factory alarm was upgraded.
A high position switch near the top of the door sets off the alarm if someone pulls on the top of the door, and an internal movement sensor sets it off if there is any movement inside the van. As Jeff explains, even if someone cut a hole through the roof or the side, the factory-fitted alarm would still detect it because of the upgrade.
Transcript source: the YouTube auto-generated transcript, re-grouped into longer passages with corrections to misheard words (for example "Stealth Trap", "B-pillar", "PIR sensor" and the website address). Automated transcripts can contain recognition errors and should be checked against the original video.